Last lesson, We took apart the input shaft, replaced the parts, and reassembled the shaft. Now, we do the same thing to the Pinion shaft. Disassembling the Pinion Shaft We use the press to press off the bearings holding the gears to the pinion shaft. Support the bearing and push the shaft through from the
How to Re-Build a Porsche 915 Transmission Pinion Shaft. Read More »
In this lesson, we take a closer look at the Input Shaft. In the last lesson, we took apart the Porsche 915 transmission but did not tackle the gear sets. The input and pinion shaft are the main parts of the transmission. We cover the pinion shaft in the next installment. Taking Apart the Input
How to Re-Build a Porsche 915 Transmission Input Shaft Read More »
In our last lesson, we covered installing your chain tensioners. In this lesson, we are up to installing the rest of the rocker shafts and performing the valve adjustment. Remember we installed an intake rocker on each side to set the timing? If not, you can catch up with that here. Timing your cam shafts.
How to set your Valve Adjustment. Rebuilding your Air-Cooled Porsche Read More »
Subscribe to our email list and get regular notifications of new videos and blog articles on how to repair your own car.