Subject: Clutch Cable Binding Models: 911 ALL
Bulletin Number: 81 – 03
If rubber sleeve over clutch cable is installed as shown at A (not all the way to clutch release lever), the clutch cable could bind.

If binding occurs, check and correct (if necessary) as follows:
Apply grease to exposed section of cable (B) toward release lever.

- Move rubber sleeve all the way to release lever at shown at (C)
Note:
Rubber sleeve was installed as instructed here on vehicles beginning with VIN 91BS120582 (Coupe) and VIN 91BS160585 (Targa)
home page: klassikats.com