Subject: Fuse for Front A/C Condenser Fan Models: 911 Carrera/911 Turbo 1988

Bulletin Number: 88 – 03

A wiring harness with a 7.5A inline fuse is installed between the condenser fan wiring plug connector (arrow in Figure 1) and the existing condenser fan wiring harness.

Harness with inline fuse –

Part number: 911.612.077.00

From production date: March 7, 1988

VIN                                        91 JS 12 1630 – 911 Coupe

                                                91 JS 12 5069 – 911 Club Sport

                                                91 JS 16 1296 – 911 Targa

                                                91 JS 17 1535 – 911 Cabriolet

                                                93 JS 05 0607 – 911 Turbo Coupe

                                                93 JS 07 0394 – 911 Turbo Cabriolet

This fuse harness can be installed in earlier cars.

Important Notice: Technical Bulletins are intended for use by professional technicians, not a “Do-it-yourselfer.” They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Special tools may be required to perform certain operations identified in these bulletins. Use of tools and procedures other than those recommended in these bulletins may be detrimental to the safe operation of your vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your Porsche Dealer for information on whether your vehicle may benefit from the information. Part numbers listed in these bulletins are for reference only. Always check with your authorized Porsche dealer to verify correct part numbers.

important notice: klassikats.com